|
Question:
Recently
my watch began reading time in a most bizarre
way. Someone told me it might be magnetized.
What does this mean and how could it have
happened?
Oscar
Peterson, Oxford, England
Answer
by Professor J.C. Nicolet
A
bit of history
The
phenomenon of magnetism was first observed by
the Greeks about 600 B.C. The natural magnet
Fe3O4 (a black ferrous oxide), called magnetite
was found in the province of Magnesia in Turkey.
Around the 3rd Century A.D., the Chinese used
magnetic material found in nature to make their
compasses so necessary in navigating the high
seas. In 1600, William Gilbert, physician to
England's Queen Elizabeth I, published a treatise
called "De Magnete" which theorized
that the earth was one gigantic magnet, thus
explaining variations in the movement of needles
that had been magnetized.
0 |
| A
piece of magnetite found in the 17th Century
which has been enclosed in bronze. This
natural magnet was placed in compasses
used to navigate the high seas. |
Artificial
magnetism
Magnetic
fields produced by natural magnets are too weak
to disturb the operation of a watch. The same
is not true, however, of man-made magnetic fields.
In the early 19th Century, when scientists discovered
how to produce very large electric currents,
strong magnetic fields appeared by electromagnetic
inductance. This important physical phenomenon
was discovered in 1831 by Faraday, and began
the development of important practical applications
of electricity, i.e. electric motors, current
generators, telegraph, telephone, radios, etc.
In 1872, Siemens produced the first really efficient
electric motors, and over the next 30 years,
these new inventions quickly found their way
into small workshops wherever electricity was
available.
By
the end of the 19th Century, the widespread
use of electric motors brought with it the widespread
magnetization of pocket watches. The first "victims"
of this artificial magnetism were people employed
in factories using electricity. The early current
generators caused the formation of strong magnetic
fields which had a negative effect on any watches
worn in the workplace.
A
solution to this problem arrived in the form
of an apparatus composed of a horseshoe-shaped
magnet that could be turned by means of a crank.
At each half-turn, the polarity of the magnetism
at any given point changed direction. By alternatively
moving the magnetized object towards the horseshoe
and then away from it, the article could be
demagnetized. (This same principle is used today
except that the horseshoe has been replaced
by a powerful coil connected to an alternating
current.)
 |
Small
iron filings demonstrate the lines of
a magnetic field surrounding a magnet. |
Early
preventive measures
In
the 19th Century, the regulating organs of watches
were made essentially of steel thus making them
highly susceptible to the effects of magnetic
fields. The first measures to prevent this problem
consisted of placing pocket watches in empty
waxed white iron boxes which conducted the magnetic
forces. While these waxed boxes were very efficient
in protecting the watches, their main drawback
was that they had to be opened to tell the time.
The
first quarter of the 20th Century brought about
significant changes in this domain. The 1920
Nobel prize winner, Charles-Edouard Guillaume
of Fleurier, Switzerland invented a nickel-iron
alloy which replaced the earlier steel alloy
in making balance springs. This greatly improved
the reliability of watches for three reasons:
·
They were less sensitive to magnetism.
·
They were less sensitive to rust due to humidity.
·
They were less sensitive to thermal changes
(which was the principal aim of Guillaume's
research).
With
this alloy and the invention of stainless steel
used in making cases, watches were no longer
susceptible to the effects of magnetism in the
home or in normal industrial workplaces.
And
gold?
Unlike
their steel cousins, watch cases made from gold
do not protect the watch from the effects of
magnetism. It is therefore advisable to equip
the movements of these timekeepers with a para-magnetic
screen made of iron, mu-metal or permalloy.
This precaution is usually not taken for esthetic
reasons. A gold watch with a protective screen
is not very elegant, making it more difficult
to sell. Perhaps one day, manufacturers will
look more closely at this problem. In the meantime,
wearers of gold watches should be careful not
to expose their timepieces to magnetic fields.
Magnetic
fields in the home
So
where are the risks of these forces in the home?
Non-negligible magnetic fields are found near
loudspeakers, stereo systems, televisions and
radios. Therefore, one should avoid setting
a gold watch on top of any of these items. Less
obvious, but posing an even greater danger for
a gold watch are the magnets found in refrigerator
doors or other cabinets. Even a brief contact
with these items is enough to magnetize a gold
watch. Caution is the byword when wearing one
of these timekeepers in the kitchen. Although
a magnetized watch can be demagnetized as mentioned
above, the procedure is tedious. To do a good
job, the watch must be dismantled and each steel
part demagnetized separately. |