ickaël Gaspar revealed his first wristwatch at Iamwatch, The Hour Glass’s gathering of independent watchmakers and collectors in Singapore. Its name is borrowed from the oldest custom of the craft: the souscription, by which Breguet financed his watches two centuries ago. Twenty pieces, each numbered on the dial, offered to the collectors who subscribe first.
The watch shows how it works. The balance, the pallet lever and the retrograde date sit on the dial side, under a domed sapphire crystal that works like a watchmaker’s loupe. The date hand travels its arc across the top of the dial and, at midnight on the last day of the month, flies back to the 1st in a single jump.
"I drew this dial at school because I wanted a dial that moves," said Mickaël Gaspar. "Someone who knows nothing about watchmaking should be able to look at it, understand it, and enjoy it. Ten years later it is the same idea, in a movement I finished myself, with my name on it. I test every watch before it leaves."
The Souscription began as Mickaël Gaspar’s school watch at the Morteau watchmaking school, made between the ages of seventeen and nineteen: a retrograde date, movement visible. He had not planned to put his name on the dial; his classmates persuaded him. Ten years on, the same mechanism has been rebuilt from the ground up, finished by hand, and signed.
The case is 39.9 mm in stainless steel, 13 mm high under the domed crystal, with a mirror-polished bevel running around the case band. The dial is hand-sandblasted and plated in rose gold, with the retrograde date sector at 12 o’clock, the small seconds, and the balance under its bridge between seven and eight o’clock. The piece number is engraved on the left of the dial; the signature is at three o’clock. The numerals of the date, the seconds and the chapter ring are filled with Super-LumiNova, as are the hands, which are black-polished and curved by hand. The strap is hand-stitched calf leather on a steel pin buckle.
The movement is hand-wound, built on a modified Swiss base plate and gear train around the retrograde date mechanism Mickaël Gaspar designed as a student and has refined ever since. The wheel staffs and pinions are turned on a traditional lathe; certain wheels are cut in Les Brenets; the balance wheel is made and balanced in the atelier, and the Breguet overcoil is formed and pinned by hand.
The bridges are hand-finished: sandblasted, bevelled with mirror-polished edges and inward angles, two of them in black-polished steel. Nine components in all are black-polished by hand, the hands among them. Each watch takes some 250 hours of machining and hand finishing.
TECHNICAL SPECIFICATIONS
Movement
- Hand-wound, Mickaël Gaspar retrograde date, developed in Les Brenets on a modified Swiss base plate and gear train
- Functions: hours, minutes, small seconds, retrograde date with instantaneous return, corrected through the crown
- Frequency: 2.5 Hz (18,000 vibrations per hour) · Power reserve: 46 hours · Jewels: 26
- Balance spring: Breguet overcoil, formed and pinned by hand · Escapement: Swiss lever
- Finishing: bridges hand-sandblasted and hand-bevelled with mirror-polished edges and inward angles; nine black-polished components, including two bridges and the hands; staffs and pinions turned on a traditional lathe; balance made and balanced in the atelier; assembled, adjusted and tested by Mickaël Gaspar
- Some 250 hours of machining and hand finishing per watch
Case and dial
- Stainless steel 316L, 39.9 mm × 13 mm, mirror-polished bevel on the case band Domed box sapphire crystal front, flat sapphire case back · Water resistance: 3 bar, tested on every piece
- Dial: hand-sandblasted, rose-gold plated; Super-LumiNova on numerals, chapter ring and hands; hands black-polished and curved by hand
- Engraved: "Mickael Gaspar · Date Retrograde" and "Twenty-six jewels" on the movement; piece number on the dial
Strap, box, series
- Hand-stitched calf leather strap, steel pin buckle · Wooden box with marquetry
Twenty numbered pieces by souscription · CHF 69,000 excl. VAT


